SIMPLE    =  F
PROJECT   =  'GP'                       /GGS POLAR laboratory
SYSTEM    =  'OPS'                      /OPS usage
FLIGHT    =  1
INSTRUME  =  'UVI'                      /Ultraviolet Imager
ORIGIN    =  'MSFC'                     /Marshall Space Flight Center
OBSERVER  =  'J Spann'                  /Jim Spann
COMMENT
DESC      =  'Comments'
COMMENT
DATE      =  '03-12-2003'                 /Creation date of file
FILENAME  =  'UVI075'
FILETYPE  =  'RTC'                      /text file (RTC)
VERSION   =  1
DATE      =  '2003:075'                   /Date request is to begin
END

It is requested that the following commands be submitted in support of
opening of the UVI aperture door post S/C Maneuver and contingency code
patch. These commands should be submitted during the scheduled DSN
contact on 03/16/03 between /14:00 -16:10 UT.



A UVI representative is required to be present via phone during this
operation. Voice contact is (919) 345-9890.  If there are any questions,

call Hassan Dougani @ (919) 345-9890.

The requested commands are:

1.	S   PIUVIAPDRCTRL("OPEN")

2.	/I_UVI_MIN  MIN28    I:0 I:0 I:0

3.	/I_UVI_MIN  MOD_ADDR   X:20   X:8F   X:11
4.	/I_UVI_MIN  MOD_WORD  X:A2   X:73

5.	/I_UVI_MIN  MOD_ADDR  X:20  X:A2  X:73
6.	/I_UVI_MIN  MOD_WORD X:20    X:C0

7.	/I_UVI_MIN  MOD_ADDR  X:20  X:A2  X:75
8.	/I_UVI_MIN  MOD_WORD X:E7   X:AB

9.	/I_UVI_MIN  MOD_ADDR  X:20  X:8F  X:11
10.	/I_UVI_MIN  MOD_WORD X:A2    X:63

11.	/I_UVI_MIN  MOD_ADDR  X:20  X:A2  X:63
12.	/I_UVI_MIN  MOD_WORD X:0E    X:1A

13.	/I_UVI_MIN  MOD_ADDR  X:20  X:8F  X:11
14.	/I_UVI_MIN  MOD_WORD X:A8    X:95

15.	/I_UVI_MIN  MOD_ADDR  X:20  X:A8  X:95
16.	/I_UVI_MIN  MOD_WORD X:20    X:C0

17.	/I_UVI_MIN  MOD_ADDR  X:20  X:A8  X:97
18.	/I_UVI_MIN  MOD_WORD X:B8   X:AA

19.	/I_UVI_MIN  MOD_ADDR  X:20  X:8F  X:11
20.	/I_UVI_MIN  MOD_WORD X:A7    X:F6

21.	/I_UVI_MIN  MOD_ADDR  X:20  X:A7  X:F6
22.	/I_UVI_MIN  MOD_WORD X:9E    X:80

23.	/I_UVI_MAJ EN_HVPS

24.	/ I_UVI_MIN GAIN I:1

25.	/I_UVI_MIN   MIN28  I:10  I:10  I:10 

;Wait For Contingency mode after this command

26.	/I_UVI_MIN   MIN28  I:0  I:0  I:0

27.	/ I_UVI_MIN GAIN I:'n'                ;Repeat this command as
needed

28.	/I_UVI_MIN   MIN28  I:10  I:10  I:10